flashing the Vivo Y100 4G PD2358F Flash file(PD2358F) using the QPST Tool, along with firmware information, tool requirements, and step-by-step instructions.

✅ Download Vivo Y100 4G PD2358F Flash File + Complete Flashing Guide

If your Vivo Y100 4G (Model: PD2358F) is stuck on the logo, boot looping, or not powering on, flashing the stock firmware using QPST Tool can restore it to working condition.

📁 Available Firmware Files for Vivo Y100 4G

Choose the correct flash file version based on your device and update requirement:

1. PD2358F_EX_A_14.0.36.1.W20.V000L1_qcom_Flash_File
2. PD2358EF_EX_A_14.0.9.4.W20.V000L1_vivo_qcom_Flash_File

📥 Download Source:

• androidhub.co.in
• rom-provider.com
• [official firmware mirror sites]

🧰 Tools & Drivers Required

🔧 Step-by-Step Flashing Guide (QPST/QFIL Method)

✅ Step 1: Install Qualcomm USB Drivers

• Install Qualcomm USB Driver to ensure your PC can detect the phone in EDL (Emergency Download) Mode.
• Reboot your PC after installation.

✅ Step 2: Extract Firmware & Tools

• Extract the Vivo Y100 4G PD2358F flash file zip.
• Extract the QPST Tool (includes QFIL.exe).

✅ Step 3: Launch QFIL Tool

• Navigate to the QPST installation folder.
• Open QFIL.exe as Administrator.

✅ Step 4: Boot Device into EDL Mode

• Power off the phone completely.
• Press and hold Volume Up + Volume Down, then connect to the PC via USB.
• Check Device Manager to confirm it shows up as:
  Qualcomm HS-USB QDLoader 9008 (COMxx)

✅ Step 5: Load Firmware in QFIL

1. Select Build Type: Choose Flat Build.
2. Load Programmer File:
   • Click Browse next to Programmer Path
   • Select the file with .mbn extension (inside the firmware folder)
3. Load XML Files:
   • Click Load XML and select:
     • rawprogram_unsparse.xml
     • Then patch0.xml

✅ Step 6: Set Search Path

• Click “Browse” next to Search Path
• Point it to the folder where the firmware and XML files are located.

✅ Step 7: Start Flashing

• Click the Download button in QFIL.
• The tool will start flashing the firmware to your device.
• Wait until the process finishes and you see “Download Succeeded”.

✅ Step 8: Reboot the Device

• Disconnect your phone and power it ON.
• First boot might take 5–10 minutes — this is normal.
• Once booted, complete initial setup.

🧩 Troubleshooting Tips

📌 Need More Help?

I can assist you with:

• 🔗 Direct firmware download links
• 📹 Video tutorial for flashing via QFIL
• 📄 PDF version of this flashing guide
• 🖼️ Test point images for deep unbrick via EDL

Let me know how you’d like to proceed — happy to help!