Tecno I3 Pro Flash File Download Free

✅ Tecno I3 Pro Flash File (Stock ROM) – Unbrick | FRP Unlock | Bootloop Fix

If your Tecno I3 Pro is stuck on boot, has software issues, or you want to remove the FRP lock, flashing the official stock firmware will solve these problems. This guide provides everything you need to flash it safely.

📦 Download Tecno I3 Pro Firmware Files

Available Firmware Versions:

• i3Pro-H375D1-N-IN-180211V297
• i3Pro-H375D1-N-IN-170504V100

🔗 Download Tecno I3 Pro Flash File (All Versions)

🔧 Tools You’ll Need

⚙️ How to Flash Tecno I3 Pro – Step-by-Step

⚠️ Important Note: Flashing will erase all data. Backup your device before proceeding if possible. Make sure the battery is at least 50%.

🧰 Preparation:

• Download and install MTK USB Drivers:
  👉 Download MTK Driver
• Extract the firmware zip and tools to a folder on your PC.

🖥️ Flashing Instructions (Using SP Flash Tool):

1. Launch SP Flash Tool
   • Open the Flash_tool.exe from the extracted folder.
2. Load the Scatter File
   • Click on the “Scatter-loading” button (right side).
   • Select the Android_scatter.txt file from the extracted firmware folder.
3. Set Download Mode
   • Choose “Download Only” in the drop-down menu (do not select Format unless necessary).
4. Begin Flashing
   • Click the Download button.
5. Connect Your Phone
   • Power off the device.
   • Hold Volume Down or Volume Up, and connect your phone to the PC via USB.
6. Flashing in Progress
   • The flashing will begin automatically.
   • Once complete, you will see a green checkmark.

🛠 Alternative: Using Tecno Flash Tool

If SP Flash Tool throws an error:

1. Run SWD_AfterSales.exe (Tecno Flash Tool)
2. Go to the Settings tab in the tool.
3. Load the Android_scatter.txt file.
4. Click Play to begin flashing.
5. Connect your device (Volume Down or Up held) and wait for the process to finish.

🔗 Quick Resource Links

• 📁 Download Tecno I3 Pro Firmware
• 🧰 Tecno Flash Tool
• 🔌 MTK USB Driver
• ⚙️ SP Flash Tool