Download Tecno F3 Flash File (Stock ROM) | FRP Unlock & Firmware Flashing Guide

Flashing the Tecno F3 (a.k.a. Pop 1) with the official stock firmware helps to:

• 🔓 Remove FRP (Factory Reset Protection) Lock
• ⚙️ Fix software bugs, bootloop issues, or soft-brick
• 🔄 Restore the phone to factory condition

📁 Firmware Info

• Model: Tecno F3
• Build Number: F3-H8022AC-N-181220V155

Included Files:

• ✅ Stock ROM with Android_scatter.txt
• ✅ Tecno Flash Tool
• ✅ MTK USB Drivers

⚙️ Flashing Requirements

• 🖥 Windows PC or laptop
• 🔌 USB cable (good quality)
• 🔋 Battery charged to 50% minimum
• 💾 Optional: Backup your data before proceeding

🚀 How to Flash Tecno F3 – Step-by-Step

💡 This process uses the Tecno Flash Tool (SWD AfterSales Tool).

1. Install MediaTek USB Drivers

• Download and install MTK drivers on your PC.

2. Extract Files

• Extract the Tecno F3 firmware and the Flash Tool.

3. Launch Flash Tool

• Open the folder and run SWD_AfterSales.exe.

4. Load Scatter File

• Click Setting in the Operation Area.
• Browse and load the Android_scatter.txt file from the firmware folder.

5. Begin Flashing

• Click the Play button (Start).

6. Connect Device

• Power off the phone completely.
• Hold Volume Down or Volume Up and connect it to PC via USB.

7. Wait for Completion

• Flashing will start automatically and finish with a success message.

📥 Download Links

• 🔗 Tecno F3 Flash File – F3-H8022AC-N-181220V155
• 🔗 Tecno Flash Tool (SWD AfterSales)
• 🔗 MTK USB Driver – All Versions

🧩 Troubleshooting Tips

📌 Final Note

• ⚠️ Double-check model and build before flashing.
• 🧠 Flashing wipes all data — backup first if possible.
• 🛠 This firmware is ideal for software repair, FRP unlock, and factory restore.