If your Redmi 9C NFC is stuck on the logo, dead, bootlooping, or facing software issues, installing the official stock ROM can restore the device to factory condition.

This guide includes firmware versions, required tools, and step-by-step flashing instructions using SP Flash Tool.

📱 Device Information

• Device Name: Redmi 9C NFC
• Codename: angelican
• Processor: MediaTek (MTK)
• Flash Tool: SP Flash Tool
• Firmware Type: Scatter-based ROM

📥 Download Redmi 9C NFC Flash File

Available Firmware Versions

Android 11

• angelican_global_images_V12.5.3.0.RCSMIXM_20220708.0000.00_11.0_global

Android 10

• angelican_global_images_V12.0.16.0.QCSMIXM_20221008.0000.00_10.0_global

Required Tools

• SP Flash Tool
• MTK USB Driver

(Add your download links here)

🔄 How to Flash Redmi 9C NFC Using SP Flash Tool

Step 1: Install MTK Driver

Install MediaTek USB drivers on your PC so the phone can be detected properly.

Step 2: Extract SP Flash Tool

Download and extract the SP Flash Tool package.

Step 3: Run Flash Tool

Open the extracted folder and double-click Flash_tool.exe to launch the tool.

Step 4: Load Scatter File

Click on Scatter-Loading on the right side of the tool.
Select the firmware file named Android_scatter.txt from the extracted firmware folder.

Step 5: Select Authentication File

Load the required authentication file inside SP Flash Tool (if included with firmware).

Step 6: Start Flashing

Click on the Download button to prepare the tool.

Step 7: Connect the Phone

Switch off your phone completely.
Press and hold Volume Up or Volume Down, then connect the phone to the PC using a USB cable.

Step 8: Wait for Completion

The flashing process will start automatically.
Once completed, a success message will appear.

🛠 What This Flash File Fixes

• Stuck on MI logo
• Bootloop issue
• Software crash
• System errors
• Virus or malware problems
• Restore to official stock firmware

⚠️ Important Notes

• Flashing will erase all user data
• Use firmware matching codename angelican only
• Do not disconnect the device during flashing
• Use original USB cable for stable connection