Tecno I5 Flash File Download Free

Tecno I5 Flash File (Stock ROM) flashing guide.
I’ve also added download links to tools from androidhub.co.in for easier access:

---

✅ Tecno I5 Flash File (Stock ROM) – Unbrick | Fix Bootloop | FRP Reset

Facing issues like bootloop, stuck logo, or FRP lock on your Tecno I5? Flashing the official stock ROM will restore your device to perfect working condition. Here’s the complete flashing guide.

---

📦 Download Tecno I5 Firmware Files

Available Versions:

• i5-H379B1-N-IN-180210V234
• i5-H379B1-N-IN-170503V78

🔗 Download Tecno I5 Flash File (All Versions)

---

🛠 Essential Tools for Flashing

Tool	Purpose
MTK USB Driver	Install to let your PC detect the device properly
SP Flash Tool	Primary tool to flash the ROM
Tecno Flash Tool (Optional)	Alternative if SP Flash Tool shows errors

💡 Note: If SP Flash Tool yields an error (like “DA mismatch” or “Authentication Required”), use Tecno Flash Tool instead.

---

⚙️ How to Flash Tecno I5 – Step-by-Step

📢 Important: Flashing will erase all personal data. Take a full backup if possible before proceeding.

🔧 Pre-requisites:

• Charge your phone above 50%.
• Install MTK USB Drivers on your PC:
  👉 Download MTK Driver

📋 Flashing Steps (Using SP Flash Tool):

1. Extract the Files
   • Unzip the downloaded firmware and SP Flash Tool on your computer.
2. Launch the Flash Tool
   • Open the folder and run Flash_tool.exe.
3. Load the Scatter File
   • Click on the “Scatter-Loading” button on the right.
   • Browse and select the Android_scatter.txt file from the extracted firmware folder.
4. Select Download Mode
   • Set it to “Download Only”.
5. Start Flashing
   • Click on the Download button.
6. Connect Device
   • Power off your Tecno I5 completely.
   • Press and hold Volume Down or Volume Up and connect the device via USB cable to your PC.
7. Wait for Completion
   • Flashing will start automatically.
   • Once finished, a Green Tick will appear on the screen.

---

🔄 Alternative Method: Using Tecno Flash Tool

If SP Flash Tool gives any errors:

1. Open Tecno Flash Tool (SWD_AfterSales.exe).
2. Go to the Settings tab.
3. Load the Android_scatter.txt file.
4. Click the Play button.
5. Connect the switched-off phone (holding Volume Down/Up) to the PC.
6. Wait for successful flashing.

---

🔗 Quick Access Links

• 📁 Download Tecno I5 Flash File
• 🧰 MTK USB Driver Download
• ⚙️ SP Flash Tool Download
• 🔧 Tecno Flash Tool Download

---

✅ By following this method, your Tecno I5 will be successfully flashed and fully restored.