Download Tecno F3 Flash File (Stock ROM) | FRP Unlock & Firmware Flashing Guide
Flashing the Tecno F3 (a.k.a. Pop 1) with the official stock firmware helps to:
- 🔓 Remove FRP (Factory Reset Protection) Lock
- ⚙️ Fix software bugs, bootloop issues, or soft-brick
- 🔄 Restore the phone to factory condition
📁 Firmware Info
- Model: Tecno F3
- Build Number: F3-H8022AC-N-181220V155
Included Files:
- ✅ Stock ROM with
Android_scatter.txt - ✅ Tecno Flash Tool
- ✅ MTK USB Drivers
⚙️ Flashing Requirements
- 🖥 Windows PC or laptop
- 🔌 USB cable (good quality)
- 🔋 Battery charged to 50% minimum
- 💾 Optional: Backup your data before proceeding
🚀 How to Flash Tecno F3 – Step-by-Step
💡 This process uses the Tecno Flash Tool (SWD AfterSales Tool).
1. Install MediaTek USB Drivers
- Download and install MTK drivers on your PC.
2. Extract Files
- Extract the Tecno F3 firmware and the Flash Tool.
3. Launch Flash Tool
- Open the folder and run
SWD_AfterSales.exe.
4. Load Scatter File
- Click Setting in the Operation Area.
- Browse and load the
Android_scatter.txtfile from the firmware folder.
5. Begin Flashing
- Click the Play button (Start).
6. Connect Device
- Power off the phone completely.
- Hold Volume Down or Volume Up and connect it to PC via USB.
7. Wait for Completion
- Flashing will start automatically and finish with a success message.
📥 Download Links
- 🔗 Tecno F3 Flash File – F3-H8022AC-N-181220V155
- 🔗 Tecno Flash Tool (SWD AfterSales)
- 🔗 MTK USB Driver – All Versions
🧩 Troubleshooting Tips
| Issue | Cause | Solution |
|---|---|---|
| Phone not detected | Missing drivers | Reinstall MTK drivers |
| Flash fails midway | Incompatible firmware | Ensure correct build version |
| Stuck on logo | Incomplete flash | Reflash with firmware again |
📌 Final Note
- ⚠️ Double-check model and build before flashing.
- 🧠 Flashing wipes all data — backup first if possible.
- 🛠 This firmware is ideal for software repair, FRP unlock, and factory restore.
