Download Tecno K7 Flash File (Stock ROM) | FRP Unlock & Firmware Flashing Guide
Flashing the Tecno K7 (Spark) using official stock firmware helps to:
- 🔓 Remove FRP (Factory Reset Protection) Lock
- 🛠 Fix bootloop, hang on logo, or system errors
- 🔄 Restore the device to its original factory firmware
📁 Firmware Information
- Model: Tecno K7 (Spark)
- Firmware Versions Available:
Included Tools:
- ✅ Stock ROM (
Android_scatter.txtincluded) - ✅ Tecno Flash Tool (SWD AfterSales Tool)
- ✅ MediaTek (MTK) USB Driver
⚙️ Requirements
- 🖥 Windows PC
- 🔌 USB Cable (good condition)
- 🔋 Battery charged at least 50%
- 📤 Optional: Backup your data (flashing erases user data)
🚀 How to Flash Tecno K7 – Step-by-Step Guide
1. Install MTK USB Drivers
- Download and install MTK drivers on your Windows PC.
2. Extract the Files
- Unzip the Tecno K7 firmware and the Tecno Flash Tool.
3. Open Tecno Flash Tool
- Navigate to the tool folder and launch
SWD_AfterSales.exe.
4. Load the Firmware
- Click Setting in the Operation Area.
- Browse to the folder and select the
Android_scatter.txtfile.
5. Start Flashing
- Click the Play icon to begin.
6. Connect the Device
- Power off the phone completely.
- Press and hold Volume Down or Volume Up, and connect it to the PC via USB.
7. Wait for Success
- The flashing process will begin automatically and finish with a green “Success” prompt.
📥 Download Links
- 🔗 Tecno K7 Firmware – K7-H8019A-N-181119V195
- 🔗 Tecno K7 Firmware – K7-H8019A-N-180616V186
- 🔗 Tecno Flash Tool (SWD AfterSales)
- 🔗 MTK USB Driver – Latest
🧩 Troubleshooting Tips
| Problem | Cause | Solution |
|---|---|---|
| Not detecting phone | Driver not installed | Reinstall MTK driver |
| Flash fails | Wrong scatter file | Check firmware version |
| Bootloop | Incomplete flash | Reflash firmware |
📌 Final Notes
- ⚠️ Flashing wipes all user data – backup if needed.
- ✅ Make sure you’re using the correct firmware version for your exact model.
- 🛠 This guide is suitable for FRP removal, unbricking, and system repair.
