detailed flashing guide for the Vivo V40 Pro 5G (PD2365F) with step-by-step instructions and essential tool links for a safe firmware installation.
✅ Vivo V40 Pro 5G (PD2365F) Flash File Download & Flashing Guide
If your Vivo V40 Pro is stuck on the logo, boot looping, or facing software issues, flashing the stock firmware can fix the problem. This guide uses the SP Flash Tool and works for MediaTek (MTK) devices like the V40 Pro 5G.
📁 Download Vivo V40 Pro 5G Flash Files
| Firmware Version | Description |
|---|---|
| 📥 PD2365F_EX_A_14.0.13.0.W30.V000L1_vivo_mtk_Flash_File | Latest W30 Release |
| 📥 PD2365F_EX_A_14.0.13.0.W20.V000L1_vivo_mtk_Flash_File | Stable W20 Release |
You can download these files from trusted sources like:
🧰 Required Tools & Drivers
| Tool | Description |
|---|---|
| ⚙️ SP Flash Tool | Flashing tool for MTK-based phones |
| 🧩 MTK USB Drivers | Ensures your PC detects your phone |
| 🔐 Af Tool / MTK Auth Bypass Tool | Bypasses secure boot authentication (if needed) |
🔗 Download Required Files
- 🔧 SP Flash Tool
- 📦 MTK Drivers
- 🔓 MTK Auth Bypass Tool or search for MTK META Utility
- ⚙️ Af Tool Download (alternative flashing tool)
🛠️ How to Flash Vivo V40 Pro 5G PD2365F Using SP Flash Tool
✅ Step 1: Install MTK USB Drivers
- Run the MTK USB driver installer.
- Reboot your computer after successful installation.
✅ Step 2: Extract Firmware & SP Flash Tool
- Extract the downloaded firmware zip file.
- Extract SP Flash Tool into a separate folder.
✅ Step 3: Launch SP Flash Tool
- Right-click Flash_tool.exe and run it as Administrator.
✅ Step 4: Load Scatter File
- Click “Scatter-loading” on the right panel.
- Navigate to the firmware folder and select
Android_scatter.txt.
✅ Step 5: Connect Device to PC
- Power OFF the phone.
- Press and hold Volume Down or Volume Up, then plug in the USB cable.
- If connection fails, try connecting without pressing any key.
⚠️ Secure Boot Note:
If your device is protected by MTK Secure Boot, use MTK Auth Bypass Tool to bypass authentication before flashing.
✅ Step 6: Start Flashing
- In SP Flash Tool, click the “Download” button.
- Wait for the process to complete.
- A green check mark (✔) will confirm a successful flash.
✅ Step 7: Reboot the Phone
- Disconnect the phone.
- Power it on. The first boot may take 5–10 minutes.
🧩 Troubleshooting Tips
| Issue | Solution |
|---|---|
| Device not detected | Reinstall MTK drivers, change USB port or cable |
| Flash fails | Use Auth Bypass Tool or another firmware version |
| Bootloop after flash | Wipe data/factory reset from Recovery |
| SP Flash Tool error | Try using a different SP Flash Tool version |
📌 Need More Help?
Let me know if you want:
- 🔗 Direct firmware download links
- 📄 PDF version of this guide
- 🖼️ Test point image for deep unbrick
- 📹 Video tutorial for flashing with SP Flash Tool
I’m here to help you flash safely and successfully!