If your Yuho Y2 is stuck on the logo, facing software errors, bootlooping, or not turning on properly, flashing the official stock ROM can restore it to factory condition.
This guide includes firmware details, required tools, and step-by-step flashing instructions using the QGDP tool.
Device Information
- Device Name: Yuho Y2
- Processor: Qualcomm
- Firmware Format: .cpb
- Flash Tool: QGDP Assembly Upgrade Tool
- Flash Mode: Qualcomm Download Mode
⚠️ Note: Only Qualcomm devices with firmware extension .cpb can be flashed using the QGDP tool.
Download Yuho Y2 Flash File
Firmware Version
Required Tool
- QGDP Assembly Upgrade Tool
(Add your download links here)
How to Flash Yuho Y2 Using QGDP Tool
Follow these steps carefully:
Step 1: Download Required Files
Download the Yuho Y2 firmware file and the latest QGDP tool.
Step 2: Install Drivers
Install ADB or Qualcomm USB drivers on your PC so the device can be detected properly.
Step 3: Connect Phone in Boot Mode
Turn off your phone.
Press and hold the Boot Key (usually Volume Up or Volume Down), then connect the phone to the PC using a USB cable.
Step 4: Check Device Manager
Open Device Manager on your PC and confirm the device is detected under Qualcomm or USB ports.
Step 5: Install and Run QGDP Tool
Extract the QGDP tool and run the setup file.
After installation, open the tool.
Step 6: Login to Tool
When the login screen appears, enter:
- Username: admin
- Password: 123456
Click Login.
Step 7: Load Flash File
Click on Browse and select the Yuho Y2 firmware file (.cpb format).
Step 8: Start Flashing
Click on the Flash button to begin the flashing process.
Wait for the process to complete. Once done, the phone will reboot automatically.
What This Flash File Can Fix
- Stuck on logo
- Bootloop issue
- Software crash
- System errors
- Dead boot (software related)
- Restore to factory firmware
Important Notes
Do not disconnect the device during flashing
Flashing will erase all user data
Make sure firmware matches Yuho Y2 model
Use original USB cable for stable connection
Download Official Yuho Y2 Firmware (original flash file) without any password for Free. We also provide the Stock Rom for other Yuho devices. androidhub.co.in
Download Yuho Y2 Flash File:
How to Flash Yuho Y2:
Only Qualcomm CPU with Firmware extension .cpb can be flashed using QGDP tool.
1- Download the latest QGDP tool.
2- Install ADB driver.
3- Now, connect mobile to PC holding boot key.
4- Open device manager and confirm your mobile has been identified by PC.
5- Unzip tool and run the setup.
6- When tool interface appears, enter Username=admin & Pass=123456 as password.
7- Click on Login to use the tool.
8- Select Flash File & Flash.