Absolutely! Here’s a polished, professional, and detailed guide for flashing the Vivo Y58 5G (PD2354F) using the QPST Tool. This includes firmware details, step-by-step instructions, and flashing tips.
✅ Download Vivo Y58 5G PD2354F Flash File + Flashing Guide
Flashing your Vivo Y58 5G (PD2354F) with the official stock ROM can help resolve boot loops, software glitches, stuck logo issues, or unbrick a dead phone.
📁 Available Flash Files for Vivo Y58 5G
You can choose from the following tested and stable firmware versions:
🔹 Flash Files:
- PD2354F_EX_A_14.0.7.2.W30.V000L1_vivo_qcom_Flash_File
- PD2354F_EX_A_14.0.6.21.W20.V000L1_vivo_qcom_Flash_File
📥 Download from trusted sources like androidhub.co.in, mifirmware.com, or rom-provider.com (insert direct link if you have it).
⚙️ Required Tools & Drivers
- 🧰 QPST Tool (Qualcomm Product Support Tool)
Download QPST Tool - 🧩 Qualcomm USB Drivers
Download Qualcomm Drivers - 💻 A Windows PC and a compatible USB cable
🛠️ How to Flash Vivo Y58 5G PD2354F (Qualcomm)
Follow these steps to flash your Vivo Y58 5G using QFIL (included in QPST tool):
🔹 Step 1: Install Qualcomm USB Drivers
- Download and install Qualcomm USB Drivers.
- After installation, restart your computer for full driver detection.
🔹 Step 2: Extract Firmware & Tool
- Extract the downloaded Vivo Y58 5G firmware package.
- Extract the QPST Tool and locate
QFIL.exe.
🔹 Step 3: Launch QFIL Tool
- Run
QFIL.exeas Administrator. - The QFIL interface will appear.
🔹 Step 4: Boot Device into EDL Mode
- Power off the phone completely.
- Press Volume Up + Volume Down together and plug the USB cable into the PC.
- In Device Manager, verify it appears as:
Qualcomm HS-USB QDLoader 9008 (COMxx)
🔹 Step 5: Configure QFIL
- Build Type: Select Flat Build.
- Load Programmer:
- Click Browse and select the
.mbnfile (found in the firmware folder).
- Click Browse and select the
- Load XML Files:
- Click Load XML, select:
rawprogram_unsparse.xml- then
patch0.xml
- Click Load XML, select:
- Set Search Path:
- Navigate to the firmware folder where XML and
.mbnfiles are located.
- Navigate to the firmware folder where XML and
🔹 Step 6: Start Flashing
- Click the “Download” button in QFIL to start the flashing process.
- Wait patiently — it may take several minutes.
- Once completed, you’ll see a “Download Succeed” message.
✅ After Flashing
- Disconnect the device.
- Power it ON. The first boot may take 5–10 minutes.
- Complete the initial setup screen.
🧩 Troubleshooting & Tips
| Issue | Solution |
|---|---|
| Device not detected | Reinstall Qualcomm drivers, try different USB port/cable |
| Flashing fails | Check for matching firmware version; retry with correct XML |
| Bootloop after flash | Perform a factory reset from Recovery Mode |
| Can’t enter EDL Mode | Use test points (advanced), or deep flash cable |
📌 Need More Help?
Let me know if you’d like:
- 🔗 Direct download links
- 🎥 Video tutorial
- 📄 PDF version of this guide
- 💡 Test point images for deep unbrick
I’ve got you covered!