Download Tecno SA1S Pro Flash File | Stock ROM & FRP Unlock
Flashing the Tecno SA1S Pro with the Tecno Flash Tool can easily remove FRP (Factory Reset Protection), fix software issues, and recover dead or stuck devices.
📂 Available Firmware for Tecno SA1S Pro:
📦 Package Includes:
- Stock Firmware (Scatter Format)
- Tecno Flash Tool (SWD_AfterSales Tool)
- MediaTek (MTK) USB Drivers
🛠️ Why Flash Tecno SA1S Pro?
- 🔓 Bypass FRP Lock
- 🔄 Fix Stuck on Logo / Bootloop Issues
- 🛠️ Unbrick Dead Phone
- 📈 Upgrade or Downgrade Firmware
- 🚀 Enhance Device Performance
⚙️ Requirements:
- A Windows PC or Laptop
- A good-quality USB cable
- Installed MTK Drivers
- 50% or more battery charge
- Full data backup (Flashing erases all phone data)
🔥 Step-by-Step Guide to Flash Tecno SA1S Pro
⚡ Important: Make sure MediaTek drivers are properly installed on your PC before starting.
📋 Flashing Instructions:
- Install MediaTek USB Drivers:
- Install MTK drivers to ensure your PC can recognize the device properly.
- Download and Extract Files:
- Download the correct flash file and Tecno Flash Tool.
- Extract both zip files on your computer.
- Launch Tecno Flash Tool:
- Open the extracted flash tool folder.
- Double-click on SWD_AfterSales.exe (also called Tecno Flash Tool).
- Load Firmware:
- Inside the Flash Tool, under the Operation Area, select Setting (second option).
- Load the firmware by selecting the
Android_scatter.txtfile from the firmware folder.
- Start Flashing:
- Click on the Play button to begin the flashing process.
- Connect Your Device:
- Switch off the Tecno SA1S Pro completely.
- Connect the device to the PC while pressing the Volume Down or Volume Up key.
- If it doesn’t detect, try connecting without pressing any key.
- Complete the Flashing:
- The tool will flash the firmware onto your device.
- Once finished, a success message will appear.
- Reboot Device:
- Disconnect and power on your device.
- The first boot might take a few minutes — be patient!
📥 Download Links:
- 📁 Download Tecno SA1S Pro Flash Files
- 📁 Download Tecno Flash Tool (SWD_AfterSales)
- 📁 Download Latest MTK USB Drivers
🧠 Common Issues and Solutions:
| Problem | Reason | Solution |
|---|---|---|
| Phone not detected | Missing drivers | Reinstall MTK drivers |
| Flashing stuck midway | Wrong scatter file or bad connection | Recheck firmware, replace USB cable |
| FRP not removed | Incomplete flashing | Reflash using the correct flash file version |
| Bootloop after flash | Need factory reset | Enter recovery mode and wipe data/factory reset |
⚠️ Important Notes:
- 🚨 Make sure you use the exact firmware version for your model variant.
- 🚨 Flashing will erase all user data — Backup everything if possible.
- 🚨 Always use an original or good-quality USB cable.
With this detailed guide, you can easily flash, unlock, and repair your Tecno SA1S Pro without any hassle! 🔥📱
