Flash Tecno Pouvoir 3 Air LC6a | FRP Unlock | Fix Bootloop | Dead Fix
Flashing your Tecno LC6a (Pouvoir 3 Air) can help you:
Remove FRP Lock (Google Account)
Fix bootloop or stuck-on-logo issues
Recover from soft brick or failed updates
Restore stock firmware and resolve bugs or lags
Download Tecno LC6a Flash Files:
Grab the right firmware version for your model:
Required Tools & Drivers:
Note: If you face errors with the MultiPort Tool, switch to the Tecno Flash Tool instead.
How to Flash Tecno Pouvoir 3 Air LC6a
Important: Flashing will wipe your phone data. Backup before proceeding if possible.
Method 1: Using SP Flash Tool
- Install MTK Drivers
- Download and install from the link above.
- Restart your PC.
- Extract and Launch SP Flash Tool
- Extract the downloaded SP Flash Tool.
- Run
flash_tool.exe
as administrator.
- Load Scatter File
- Click Scatter-Loading on the tool.
- Navigate to the extracted firmware folder.
- Select the
Android_scatter.txt
file.
- Begin Flashing
- Click the Download button.
- Power off the device completely.
- Press Volume Down or Up and connect the phone via USB.
Wait for flashing to complete — you’ll see a green checkmark.
Method 2: Using MultiPort Download Tool
- Open Multiport_download_exe_v5.1420.
- Load the firmware using the Scatter File.
- Set DA and Auth files if available (optional).
- Click Start All.
- Connect the switched-off phone.
- Flashing will begin automatically.
Troubleshooting Tips
Phone Not Detected?
- Reinstall or update MTK Drivers
- Try using a different USB cable or USB 2.0 port
- Make sure your device is powered off while connecting
Bootloop After Flash?
- Reboot into Recovery Mode (Power + Vol Up)
- Perform a Factory Reset from recovery
Want to Root or Install Custom Recovery?
Let me know! I can provide:
- TWRP recovery for Tecno LC6a (if available)
- Magisk boot patching method
- Rooting instructions without PC
Helpful Links from AndroidHub.co.in
