Download Tecno ID5a Flash File (Stock ROM) | FRP Unlock & Firmware Repair
Facing issues like FRP lock, stuck at logo, software bugs, or bootloop on your Tecno ID5a?
You can easily fix all such problems by flashing the official stock firmware provided here.
📂 Download Tecno ID5a Flash File:
- ✅ Firmware Version: ID5a-H612F-O-180828V106
📦 Also Included:
- MTK Driver (MediaTek USB Drivers)
- Tecno Flash Tool (SWD AfterSales Tool)
🔥 Why Flash Tecno ID5a?
- Remove or bypass FRP (Google Account Lock)
- Fix bootloop or stuck on logo
- Unbrick dead or soft-bricked device
- Upgrade or downgrade Android OS
- Fix bugs, lag, or system instability
- Restore the phone to factory firmware
🛠️ Flashing Requirements:
- Windows PC or Laptop
- Micro USB cable
- At least 50% phone battery
- Properly installed MTK USB Drivers
- Backup of all important data (Flashing will erase everything)
⚙️ How to Flash Tecno ID5a (Step-by-Step Guide):
⚡ Note: Always make sure you have installed the correct MTK Drivers before flashing. Driver issues are the #1 reason flashing doesn’t start.
📋 Instructions:
- Install MTK USB Driver
- Download and install MediaTek drivers on your PC.
- Extract the Downloaded Files
- Unzip the Flash File package and Tecno Flash Tool (SWD_AfterSales) to a known location.
- Launch Tecno Flash Tool
- Navigate to the extracted tool folder.
- Double-click on SWD_AfterSales.exe to open the Tecno Flash Tool.
- Load the Firmware
- Click on Setting inside the tool.
- Under Load, select the Flash File (firmware package with scatter file).
- Start Flashing Process
- After loading the firmware, click Confirm and then press the Start button.
- Connect Your Device
- Power OFF your Tecno ID5a completely.
- Press and hold the Volume Down or Volume Up button.
- Connect the phone to PC via USB cable.
- Flash Begins
- The tool will detect your device and start the flashing process automatically.
- Wait until you see a Green Pass message.
- Finish
- Disconnect the phone, reboot, and enjoy your newly flashed Tecno ID5a.
📥 Direct Download Links:
- 📁 Download Tecno ID5a Flash File (ID5a-H612F-O-180828V106)
- 📁 Download Tecno Flash Tool (SWD AfterSales)
- 📁 Download MTK USB Driver (Latest Version)
🧠 Troubleshooting:
| Problem | Reason | Solution |
|---|---|---|
| Flashing not starting | MTK Driver not installed or faulty cable | Reinstall drivers or change cable/port |
| Device not detected | Wrong button or no button press | Try both Volume Up and Volume Down |
| Flash fails mid-way | Corrupted firmware file | Download firmware again from a trusted source |
⚠️ Important Warning:
- Flashing the wrong firmware can brick your device permanently.
- Always check the device model and build version before proceeding.
- Take a full backup if possible — flashing will wipe all your data.
With this guide, you can easily flash the Tecno ID5a, unlock FRP, fix system errors, and bring your device back to life in just a few minutes! 🚀
