Download Tecno D9 Flash File (Stock ROM) – Official Firmware
Easily fix software issues, unbrick your device, or restore your Tecno D9 back to stock using the official firmware.
📦 Firmware Information
- 📥 Tecno D9 Firmware Download Link
🛠️ Required Tools and Drivers
| Tool | Purpose | Download |
|---|---|---|
| MTK USB Driver | Helps your PC detect the device | ✔️ |
| SP Flash Tool (Latest Version) | Flashing the firmware | ✔️ |
⚙️ How to Flash Tecno D9 (Step-by-Step Guide)
⚠️ Note: Flashing wipes your data. Backup your important files first!
📋 Flash Instructions:
- Install MTK USB Driver
- Install the MediaTek driver on your computer.
- Extract Flash Files
- Unzip both the Tecno D9 Firmware and the SP Flash Tool packages.
- Open SP Flash Tool
- Launch the
Flash_tool.exefrom the SP Flash Tool folder.
- Launch the
- Load Scatter File
- Click on Scatter-Loading and browse to select the
Android_scatter.txtfrom the firmware folder.
- Click on Scatter-Loading and browse to select the
- Start Flashing
- Click the Download button in SP Flash Tool.
- Connect the Device
- Power off your Tecno D9.
- While holding the Volume Down or Volume Up button, connect it to your PC via USB.
- Wait for Completion
- The flashing process will start automatically.
- Once completed, you’ll see a Green Checkmark.
- Power ON the Phone
- Disconnect your device and power it ON. Setup as needed.
📥 Quick Download Section
✅ Your Tecno D9 is now successfully flashed and ready to use!
