Download Tecno Camon 12 Pro CC9 Flash File (Stock ROM)
Flashing your Tecno CC9 (Camon 12 Pro) with the official firmware can help unbrick the device, remove FRP lock, and fix software-related issues.
📂 Firmware Versions Available
🧰 Required Files & Tools
- 🔧 SP Flash Tool
- ⚙️ Tecno Flash Tool (Alternative)
- 💽 MTK USB Driver
- 📄 Firmware File with Android Scatter
🔧 How to Flash Tecno Camon 12 Pro (CC9)
Step 1: Install MediaTek (MTK) Drivers
- Download and install the MTK USB Driver on your computer to detect the device.
Step 2: Extract All Files
- Unzip the downloaded firmware package and SP Flash Tool to a separate folder.
Step 3: Launch SP Flash Tool
- Run
flash_tool.exeas Administrator.
Step 4: Load Scatter File
- Click “Scatter-loading” on the right side of the tool.
- Locate and open the
Android_scatter.txtfile from the firmware folder.
Step 5: Start Flashing
- Click “Download” to begin the flashing process.
Step 6: Connect Your Phone
- Turn off the device.
- Connect it to your PC while holding the Volume Down or Volume Up key.
Step 7: Flash Complete
- Wait until you see a green checkmark indicating a successful flash.
📦 Download Links
⚠️ Important Notes
| Issue | Solution |
|---|---|
| Phone not detected | Reinstall MTK driver and try another USB cable |
| Flashing stuck or fails | Use different SP Flash Tool version |
| FRP lock not removed | Flash the latest firmware and perform factory reset |
💡 Pro Tip: Always back up important data before flashing, and make sure your phone has at least 50% battery to avoid interruptions.
