Samsung Tab 5 MT6572 Clone Firmware (Flash File) Download, optimized for clarity, search, and user guidance, along with reference to androidhub.co.in:
✅ Samsung Tab 5 MT6572 Clone Firmware (Flash File) – Free Download
If your Samsung Tab 5 Clone (MT6572 chipset) is stuck in a boot loop, frozen on the logo, or experiencing performance issues, flashing the correct stock firmware can help restore the device to its original condition.
This is an MTK-based (MediaTek MT6572) clone tablet, not an official Samsung release, so you must use the correct firmware to avoid bricking.
📲 Device Information:
- Device Type: Samsung Tab 5 Clone
- Chipset: MediaTek MT6572
- Firmware Version: Android 4.4.2
- File Name:
Samsung_TAB_5_Clone_MT6572_4.4.2_CM2_Read_3rd_Update.zip - File Format: ZIP (contains scatter file for SP Flash Tool)
- Tool Required: SP Flash Tool or CM2
🔽 Download Firmware:
| File Name | Chipset | Android Version | Download Link |
|---|---|---|---|
| Samsung_TAB_5_Clone_MT6572_4.4.2_CM2_Read_3rd_Update.zip | MT6572 | Android 4.4.2 | Download from AndroidHub.co.in |
Alternative model supported:
- Samsung On 5 Clone (SM-G5500h) with MT6572 — Same firmware can be tested if board ID matches.
🛠️ How to Flash MT6572 Clone Firmware Using SP Flash Tool:
⚙️ Requirements:
- MediaTek USB Drivers: Download Here
- SP Flash Tool: Download Here
- Scatter-based firmware file (included in ZIP)
🔧 Flashing Steps:
- Install MTK USB drivers on your PC.
- Extract the downloaded firmware package.
- Open SP Flash Tool and load the scatter.txt file.
- Power off your device completely.
- Click Download in SP Flash Tool.
- Connect the device via USB while holding Volume Down or Volume Up.
- Flashing will start automatically and complete with a green checkmark.
⚠️ Important Notes:
Do not disconnect the device during the flashing process.
Always back up your original firmware before flashing.
Ensure you match your device’s board ID or firmware info to avoid incompatibility.
