Samsung Galaxy Core Prime SM-G360FY PB5 Lollipop INU Firmware (Flash File) – Free Download
Download Samsung Galaxy Core Prime SM-G360FY Firmware (Stock ROM)
If you own the Samsung Galaxy Core Prime SM-G360FY and need to flash the firmware for repairs, updates, or performance improvements, you’re in the right place! AndroidHub.co.in offers free and fast downloads of the official Samsung Galaxy Core Prime SM-G360FY firmware.
You can download the firmware for various models of the Samsung Galaxy Core Prime, including SM-G360FY, and select the appropriate version based on your region and carrier for a seamless experience.
Samsung Galaxy Core Prime SM-G360FY Specifications
- Model: SM-G360FY
- Display: 4.5-inch PLS TFT, 480 x 800 pixels
- Processor: 1.2 GHz Quad-core Cortex-A53
- GPU: Adreno 306
- RAM: 1GB
- Storage: 8GB internal, expandable up to 64GB via microSD
- Rear Camera: 5MP, LED flash
- Front Camera: 2MP
- Battery: 2000mAh
- OS: Android 5.1 Lollipop (Lollipop-based custom UI)
Firmware Download Links for Samsung Galaxy Core Prime SM-G360FY
- Firmware Version: G360FYXXU2BPB5_G360FYODD2BPB5_INU.zip
- 🔗 Download SM-G360FY Lollipop INU Firmware
How to Flash Samsung Galaxy Core Prime SM-G360FY Firmware Using ODIN
To flash the Samsung Galaxy Core Prime SM-G360FY PB5 Lollipop firmware, follow the steps below:
- Prepare Your Tools:
- Download the Odin Flash Tool from AndroidHub.co.in.
- Download the official firmware (G360FYXXU2BPB5_G360FYODD2BPB5_INU.zip) from the link above.
- Extract Firmware Files:
- Extract the downloaded firmware zip file.
- Inside, you should find a
.tar.md5file, which is the firmware that will be flashed to your device.
- Enable USB Debugging & OEM Unlocking:
- Go to Settings > About Phone and tap Build Number 7 times to enable Developer Options.
- In Developer Options, enable USB Debugging and OEM Unlocking.
- Install Samsung USB Drivers:
- Download and install Samsung USB Drivers on your PC to ensure proper connectivity.
- Connect Your Device:
- Turn off your Galaxy Core Prime SM-G360FY.
- Boot into Download Mode by holding Volume Down + Home + Power until the warning screen appears, then press Volume Up to enter Download Mode.
- Connect your phone to your PC via USB cable.
- Flash the Firmware:
- Open Odin on your PC.
- In Odin, click on AP and select the
.tar.md5firmware file you extracted earlier. - Ensure that Auto Reboot and F. Reset Time are checked in Odin.
- Click Start to begin the flashing process.
- Wait for Completion:
- Odin will show a green “PASS” message when the firmware flashing is complete.
- Your device will automatically reboot into the new firmware.
Troubleshooting Common Issues
- Device Not Recognized by Odin:
- Ensure USB drivers are installed and you are using a reliable USB cable.
- Try different USB ports or a different PC if the issue persists.
- Failed to Flash:
- Re-download the firmware and ensure you’re using the correct version.
- Try using Odin 3.12.7 or Odin 3.13 for compatibility.
- Boot Loop After Flashing:
- Perform a factory reset via recovery mode (Volume Up + Home + Power).
- Re-flash the firmware if needed.
Why Flash Samsung Galaxy Core Prime SM-G360FY Firmware?
Flashing the official firmware offers numerous benefits, such as:
- Fixing Software Issues: Resolving issues like freezing, crashing, or unresponsiveness.
- Improving Performance: Boosting speed and performance, especially after updates.
- Restoring Your Device: If your device is bricked or stuck in boot loops, flashing the firmware can bring it back to life.
- System Updates: Get the latest security patches or system improvements provided by Samsung.
Conclusion
The Samsung Galaxy Core Prime SM-G360FY may face performance issues, or you might want to upgrade or repair your system. AndroidHub.co.in provides the latest Lollipop INU firmware for free, allowing you to keep your device running smoothly with minimal hassle.
If you need further assistance, feel free to visit our support page for guides and FAQs!
