Redmi 12C Unlock & FRP Reset Using UMT Tool

Redmi 12c lock and frp unlocked by umt tool

by

redmi 12c lock and frp unlocked by umt tool miui 13 androidhub

🔓 Redmi 12C Unlock & FRP Reset Using UMT Tool (MIUI 13)

If your Redmi 12C is locked or FRP-protected, you can easily remove the lock and factory reset the device using UltimateMTK Tool. Below is a real example and step-by-step guide using UMT MTK v1.7.

✅ Tested Device Information

Brand/ModelXiaomi Redmi 12C (earth)
MIUI VersionMIUI 13
ChipsetMediaTek Helio G85 (MT6768)
Operation DoneErase Data + FRP Unlock
Tool UsedUMT MTK2 v1.7

⚙️ Operation Details (UMT Log Highlights)

  • Port Detected: MediaTek USB Port (COM6)
  • BROM Mode: Active
  • BROM Exploit: Success
  • Chipset ID: MT6768 Helio G85
  • Security Config: [SBA: True] [SLA: True] [DAA: True]
  • Flash Type: EMMC Y2P064 – 58.24 GB
  • Bootloader Status: LOCKED
  • User Data Erased: ✔️
  • FRP Lock Reset: ✔️

🧰 Requirements

  1. UMT Dongle with UltimateMTK v1.7 or newer
  2. MTK USB Drivers installed on PC
  3. Original USB Cable
  4. Windows PC (Windows 7/10/11)

🔑 Boot Key for Redmi 12C

Press Volume UP + Volume DOWN together when connecting to PC to enter BROM Mode.

📲 How to Unlock Redmi 12C (Erase Data + FRP) with UMT Tool

Step 1: Install MTK Drivers

  • Install MediaTek USB Drivers to ensure your device is detected in BROM Mode.

Step 2: Launch UMT MTK Tool

  • Open UltimateMTK2 v1.7 or later.
  • Set Brand/Model to Auto Detect.
  • Enable BROM Exploit: ON.

Step 3: Connect Device in BROM Mode

  • Power off the device.
  • Hold Volume UP + Down, then connect USB cable.
  • The tool will detect the device on COM Port.

Step 4: Start Operation

  • Choose Erase Data + FRP under the Operations tab.
  • Click Start.
  • The tool will automatically:
    • Install filter drivers
    • Send DA (Download Agent)
    • Initialize memory
    • Erase userdata
    • Reset FRP lock

Step 5: Wait for Confirmation

  • Operation Completed Message
  • Log saved for reference
  • Device will auto-reboot after unlocking

⚠️ Important Notes

  • This process does not unlock the bootloader; the bootloader remains locked.
  • Always ensure battery is at least 50% before performing operations.
  • Use at your own risk; flashing may void warranty.

💾 UMT Tool Output Log Summary

yamlCopyEditOperation : Erase Data + FRP
Chipset  : MT6768 Helio G85
BROM Exploit : Success
FRP Reset  : OK
Userdata Erase : OK
Bootloader : LOCKED

🔧 Conclusion

The UMT Tool is a powerful solution for unlocking Xiaomi devices like the Redmi 12C running MIUI 13. With one-click erase and FRP reset, you can restore your device to factory condition in minutes.

Need help finding UMT Tool, drivers, or guides? Just let me know!

Redmi 12C Unlock & FRP Reset Using UMT Tool
Redmi 12C Unlock & FRP Reset Using UMT Tool
Redmi 12C Unlock & FRP Reset Using UMT Tool
Redmi 12C Unlock & FRP Reset Using UMT Tool
Redmi 12C Unlock & FRP Reset Using UMT Tool
Redmi 12C Unlock & FRP Reset Using UMT Tool

Brand/Model : Auto / Auto Detect
Operation : Erase Data + FRP
BOOT CFG : [BROM EXPLOIT : ON]
Waiting for Device…Found
Port : MediaTek USB Port (COM6)
Device Path : \?\usb#vid_0e8d&pid_0003#7&14b487e4&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:True] [DAA:True]
MEID : 449DA835872235CF7BB1DAF100A2AA19
SoC ID[0] : DDFC9AB236D1FE744DF7F3E35C1E228E
SoC ID[1] : 38FBE44B502DCC38E817A310432A5DFA
Running Exploit… Installing Filter… OK Done
Downloading Preloader…OK
Saved as : preloader_earth.bin
Loading EMI Config from Preloader…OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using Internal DA!
Sending 1st DA…OK
Jump DA Address…OK
Syncing…OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration…OK
Reading EMI Configuration…OK
CID : 9B010059325030363400707842CC2A37 [EMMC]
Initializing Storage…OK
Sending 2nd DA…OK
Initialize DA Extension…OK
HRID : E25EFE861BA79BC32204AFF8D9E0E134
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : Y2P064
CID : 9B010059325030363400707842CC2A37
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table…OK
Bootloader : LOCKED
Erasing Userdata…OK
Resetting FRP…OK
Operation Finished.
[UltimateMTK2 v1.7]
Log Saved : 20250319_104758.log

Leave a Comment