Realme Narzo N63 RMX3939 UNLOCK FRP USING UMT

Realme Narzo N63 RMX3939 UNLOCK FRP USING UMT

by

Realme Narzo N63 RMX3939 UNLOCK FRP USING UMT

To unlock the FRP (Factory Reset Protection) on the Realme Narzo N63 RMX3939 using UMT (Ultimate Multi Tool), you need to follow a series of steps carefully. Please ensure you have all the necessary tools and requirements in place before proceeding:

Prerequisites:

  1. UMT Tool (Ultimate Multi Tool) installed on your computer.
  2. Realme Narzo N63 RMX3939 device with FRP lock enabled.
  3. USB Drivers installed for the Realme device.
  4. USB Cable to connect the phone to the computer.
  5. A stable internet connection for any software updates that might be required.

Steps to Unlock FRP on Realme Narzo N63 RMX3939 Using UMT:

  1. Install UMT (Ultimate Multi Tool):
    • Ensure that you have the latest version of UMT installed on your PC.
    • If you don’t have it, download and install UMT from its official source or a trusted provider.
  2. Enable Developer Options on the Device:
    • On your Realme Narzo N63, go to Settings.
    • Tap on About phone.
    • Tap Build Number 7 times to enable Developer options.
    • Go back to the Settings and open Developer options.
    • Enable USB Debugging.
  3. Boot the Device into Fastboot/EDL Mode:
    • Fastboot Mode:
      • Power off your device.
      • Press and hold Volume Down + Power buttons together until the Realme logo appears to enter Fastboot mode.
    • EDL Mode (Emergency Download Mode):
      • If your device doesn’t go into Fastboot mode, try using EDL Mode.
  4. Connect the Device to Your Computer:
    • Use a USB cable to connect the Realme Narzo N63 RMX3939 to the PC.
  5. Open UMT Tool:
    • Launch UMT (Ultimate Multi Tool) on your computer.
    • If prompted, select the Realme brand from the list of devices.
  6. Choose FRP Unlock Option:
    • In the UMT interface, select the FRP/Lock Reset option.
    • Choose the appropriate model Realme Narzo N63 RMX3939 or select Auto Detect if the tool has this option.
  7. Click on FRP Unlock:
    • Once the device is detected, click on FRP Unlock or Reset FRP option.
    • Wait for the process to complete. This may take a few minutes.
  8. Reboot the Device:
    • After the FRP unlock process completes successfully, the UMT tool will notify you that the process is finished.
    • Reboot your Realme Narzo N63 RMX3939 and disconnect it from the PC.
  9. Verify FRP Unlock:
    • Once the device has restarted, go to the Settings and check if the FRP lock has been removed.
    • You should now be able to skip the Google account verification screen.

Important Notes:

  • Backup Your Data: Before performing any operation, ensure that all your important data is backed up as the FRP unlock process can sometimes result in data loss.
  • Be Careful: Using third-party tools to unlock FRP might void your warranty, and there’s a risk of bricking the device if not done properly. Always ensure you’re using trusted tools.
  • Device Compatibility: Make sure your specific Realme model (RMX3939) is supported by the UMT tool for FRP unlock.

If you follow these steps carefully, you should be able to unlock FRP on your Realme Narzo N63 RMX3939 successfully using UMT.

Let me know if you encounter any issues or need further clarification!

Leave a Comment