If your Samsung Galaxy J6 Plus (J610F / J610FN) is stuck on the logo, facing software bugs, or needs a system restore, flashing the stock firmware can fix the problem. Below you will find all firmware versions and combination files for this device.

Firmware Details

• Device: Samsung Galaxy J6+
• Model: SM-J610F / SM-J610FN
• Brand: Samsung
• Android Version: Varies by firmware
• File Type: Stock ROM / Flash File
• Tool: Odin

---

Download Samsung J610F Firmware

U5 Firmware

Download U5 Firmware

U4 Firmware

Download U4 Firmware

U3 Firmware

Download U3 Firmware

U2 Firmware

Download U2 Firmware

U1 Firmware

Download U1 Firmware

---

Samsung J610F Combination Files

Combination files are mainly used for FRP unlock, debugging, and repairing software issues.

Combination Downloads

• J610F Combination U1
• J610F Combination U2
• J610F Combination U3
• J610F Combination U4
• J610F Combination U5

---

How to Flash Samsung J6 Plus Firmware

Step 1: Enter Download Mode

1. Power off the phone.
2. Press Power + Volume Down + Home/Menu button together.
3. When the warning screen appears, press Volume Up to enter Download Mode.

Step 2: Load Firmware

1. Download and extract the firmware file.
2. Open Odin Tool on your computer.
3. Load the firmware files into the correct sections:
   • BL
   • AP
   • CP
   • CSC or HOME CSC

Step 3: Start Flashing

1. Connect the phone using a USB cable.
2. Click Start in Odin.
3. Wait until the flashing process completes.

Step 4: Hard Reset

1. Remove the battery or force restart.
2. Boot into recovery mode using Power + Volume Up + Home/Menu.
3. Perform Factory Reset / Wipe Data.
4. Reboot the device.

After rebooting, the touch screen and system should work normally.