If your Samsung Galaxy J6 Plus (J610F / J610FN) is stuck on the logo, facing software bugs, or needs a system restore, flashing the stock firmware can fix the problem. Below you will find all firmware versions and combination files for this device.

Firmware Details

• Device: Samsung Galaxy J6+
• Model: SM-J610F / SM-J610FN
• Brand: Samsung
• Android Version: Varies by firmware
• File Type: Stock ROM / Flash File
• Tool: Odin

Download Samsung J610F Firmware

U5 Firmware

Download U5 Firmware

U4 Firmware

Download U4 Firmware

U3 Firmware

Download U3 Firmware

U2 Firmware

Download U2 Firmware

U1 Firmware

Download U1 Firmware

Samsung J610F Combination Files

Combination files are mainly used for FRP unlock, debugging, and repairing software issues.

Combination Downloads

• J610F Combination U1
• J610F Combination U2
• J610F Combination U3
• J610F Combination U4
• J610F Combination U5

How to Flash Samsung J6 Plus Firmware

Step 1: Enter Download Mode

1. Power off the phone.
2. Press Power + Volume Down + Home/Menu button together.
3. When the warning screen appears, press Volume Up to enter Download Mode.

Step 2: Load Firmware

1. Download and extract the firmware file.
2. Open Odin Tool on your computer.
3. Load the firmware files into the correct sections:
   • BL
   • AP
   • CP
   • CSC or HOME CSC

Step 3: Start Flashing

1. Connect the phone using a USB cable.
2. Click Start in Odin.
3. Wait until the flashing process completes.

Step 4: Hard Reset

1. Remove the battery or force restart.
2. Boot into recovery mode using Power + Volume Up + Home/Menu.
3. Perform Factory Reset / Wipe Data.
4. Reboot the device.

After rebooting, the touch screen and system should work normally.