iTel P55 P661N Flash File Download free from androidhub
Download iTEL P55 P661N Flash File:
Boot Key: Volume UP + Down
How to Flash iTEL P55 P661N:
Download iTEL P55 P661N Flash file
1- Download the Firmware package & Flash tool.
2- Out of the icon appearing, Double click on Flash Tool.
3- it will launch the tool on your PC, Then Select Scatter file from firmware Click on Start All.
4- Then it will verify for PC Memory Checksum & Now Click Download tab.
5- Switch off your Mobile and Connect it to PC by pressing Volume down and Volume up key.
6- It will lead you to Successful Flashing.
iTel P55 P661N Flash File Download & Flashing Guide
If you need to flash your iTel P55 P661N to fix software issues, unbrick the device, or update the firmware, follow this detailed guide.
What is a Flash File (Stock ROM)?
A Flash File or Stock ROM is the official firmware installed on your iTel P55 P661N. This firmware is essential for running the device smoothly and fixing any software-related problems.
Why Flash Your iTel P55 P661N?
- Fix Boot Loop Issues – Stuck on logo or restart issues.
- Unbrick Your Device – Revive a dead phone due to corrupted software.
- Upgrade or Downgrade Firmware – Install the latest or previous ROM version.
- Remove Screen Locks & FRP – Reset the device when locked out.
- Fix IMEI & Network Issues – Resolve “No Service” or invalid IMEI errors.
Available iTel P55 P661N Flash Files (Stock ROMs)
Below are the available firmware versions for iTel P55 P661N:
| Version | Firmware Name |
|---|---|
| V437 | P661N-H334IJKLN-T-GL-241113V437-Flash-File-RMM |
| V677 | P661N-H334IJK-T-GL-231123V677 |
Make sure to download the correct firmware version to avoid compatibility issues.
Tools Required for Flashing iTel P55 P661N
Before flashing your device, you need to download the following tools:
🔹 SP Flash Tool – Used for flashing Mediatek devices.
🔹 Oppo MTK Drivers – Required for Mediatek devices.
🔹 MTK Auth Bypass Tool – Needed to bypass secure boot.
How to Flash iTel P55 P661N (Step-by-Step Guide)
Step 1: Install Required Drivers & Tools
- Install Oppo MTK Drivers to ensure your device is detected.
- Download and extract SP Flash Tool on your PC.
- Extract the firmware file (Stock ROM) to a folder on your computer.
Step 2: Load Firmware in SP Flash Tool
- Open SP Flash Tool by double-clicking on
flash_tool.exe. - Click Choose next to Scatter-loading File.
- Navigate to the firmware folder and select the scatter.txt file.
Step 3: Boot Your Device into Flash Mode
- Turn off your iTel P55 P661N.
- Press and hold
Volume UP + Volume DOWN. - Connect your phone to the PC using a USB cable.
Step 4: Start Flashing
- In SP Flash Tool, click on Download.
- Wait for the flashing process to complete (it may take a few minutes).
- Once done, you will see a green checkmark indicating success.
Step 5: Reboot Your Phone
- Disconnect the device and power it on.
- The first boot may take 5-10 minutes.
Troubleshooting Common Issues
🔴 Device Not Detected?
✅ Install MTK USB Drivers and try a different USB cable or port.
🔴 Stuck at Boot Logo?
✅ Perform a Factory Reset in Recovery Mode (Power + Volume Up).
🔴 Error: Authentication Needed?
✅ Use MTK Auth Bypass Tool before flashing.
Final Thoughts
Flashing your iTel P55 P661N is a simple process if you follow the steps carefully. Always download firmware from trusted sources to avoid bricking your device like androidhub.
💡 Need help? Let me know in the comments! 🚀