Tecno D3 Flash File Download Free

Download Tecno D3 Flash File (Stock ROM) – Unbrick | Fix Software Issues

If your Tecno D3 is stuck on logo, bootlooped, or bricked, flashing the official firmware can bring it back to life! Follow this detailed guide to flash your device safely.

---

📦 Download Tecno D3 Flash File

Available Firmware:

• 📥 TECNO D3 Firmware (Stock ROM)

---

🛠 Tools Required for Flashing

Tool	Purpose	Download Link
MTK USB Driver	Connect MediaTek devices to PC	✔️
SP Flash Tool (Latest Version)	Flash firmware files	✔️

---

⚙️ How to Flash Tecno D3 (Step-by-Step)

⚠️ Note: Flashing will erase all personal data. Backup important files before proceeding.

📋 Flashing Instructions:

1. Install Drivers
   • First, install the MTK USB Driver on your computer.
2. Extract Files
   • Download and extract both the Tecno D3 firmware and the SP Flash Tool package.
3. Launch SP Flash Tool
   • Open the SP Flash Tool folder.
   • Double-click Flash_tool.exe to launch it.
4. Load Scatter File
   • Click the Scatter-Loading button on the right side.
   • Browse to the firmware folder and select the Android_scatter.txt file.
5. Begin Flashing
   • After loading the scatter file, click the Download button.
6. Connect Device
   • Power off your Tecno D3.
   • Press and hold the Volume Down or Volume Up key.
   • Connect the phone to your PC via a USB cable.
7. Complete Flash
   • Flashing will begin automatically.
   • When you see a Green Tick message, it means the process is completed successfully.
8. Reboot
   • Disconnect your device.
   • Power it ON and complete the setup wizard.

---

📥 Quick Downloads

• 📁 Download Tecno D3 Flash File (Firmware)
• 📁 Download MTK USB Driver
• 🧰 Download SP Flash Tool

---

✅ Done! Your Tecno D3 should now boot up without any issues.