Download Tecno F3 Pro Flash File (Stock ROM) | FRP Unlock & Firmware

Flashing the Tecno F3 Pro can remove FRP (Factory Reset Protection) lock, fix boot errors, unbrick your device, and restore it to factory firmware.

📁 Firmware Information

• Model: Tecno F3 Pro
• Build Number: F3Pro-H8022ACDE-N-13M-181220V98

📦 Included Files:

• Android Scatter-based Stock ROM
• Tecno Flash Tool (SWD_AfterSales)
• MTK USB Drivers

⚙️ Why Flash Tecno F3 Pro?

• 🔓 Remove FRP / Google Account Lock
• 🛠️ Fix bootloop, stuck on logo, or crashing apps
• ⚙️ Restore factory settings
• 🆙 Upgrade/Downgrade Android version
• ⚰️ Revive dead or soft-bricked device

🧰 Requirements:

• Windows PC or Laptop
• USB Cable
• Battery charged to at least 50%
• Firmware files & tools
• Backup your personal data (flashing will erase all)

🚀 How to Flash Tecno F3 Pro:

🔧 Ensure MTK Drivers are installed before proceeding

Step-by-step Guide:

1. Install MTK Drivers on your PC.
2. Download & Extract:
   • Tecno F3 Pro Flash File
   • Tecno Flash Tool (SWD_AfterSales)
3. Launch Flash Tool:
   • Open the extracted tool folder.
   • Run SWD_AfterSales.exe.
4. Load Firmware:
   • In the tool, go to Setting under Operation Area.
   • Locate and select the Android_scatter.txt file from the firmware folder.
5. Start Flashing:
   • Click Play (Start) to begin the process.
6. Connect the Phone:
   • Power off your device.
   • Hold Volume Down or Volume Up, then connect via USB.
7. Flashing Complete:
   • Wait until the progress bar completes and shows a success message.

📥 Download Links:

• 🔗 Tecno F3 Pro Flash File – F3Pro-H8022ACDE-N-13M-181220V98
• 🔗 Tecno Flash Tool (SWD_AfterSales)
• 🔗 MTK USB Driver (Latest)

🛠️ Common Issues & Fixes

📌 Notes:

• ⚠️ Flashing wipes data – backup is strongly recommended.
• ⚠️ Use firmware that matches your exact build number.
• ⚠️ Do not disconnect the device while flashing is in progress.