Tecno KB8 Flash File Download Free

Tecno Spark 3 Pro KB8 Flash File (Stock ROM) guide. It includes clear steps, direct links from androidhub.co.in, and helpful tips to ensure safe and successful flashing.

Table of Contents

✅ Tecno Spark 3 Pro KB8 Flash File (Stock ROM) – Unbrick | Remove FRP | Fix Issues

Flashing the Tecno Spark 3 Pro (KB8) using the official stock firmware helps you:

🔓 Bypass/Remove FRP Lock
⚠️ Fix bootloop, dead phone, or stuck on logo
📱 Restore factory OS, remove malware or lag
🔄 Repair software-related issues

📥 Download Tecno Spark 3 Pro KB8 Firmware

Firmware Version:

KB8-H624BNPQ-P-190424V179

🔧 Required Files & Tools:

Tecno Flash Tool
MTK USB Driver

🧑‍🔧 How to Flash Tecno Spark 3 Pro KB8

⚠️ Flashing Warning: All user data will be erased. Back up important data first.

✅ Step-by-Step Flashing Instructions

Install MTK Drivers
- Download and install MTK USB Drivers on your PC.
Extract Files
- Extract the downloaded Tecno KB8 firmware and Tecno Flash Tool to separate folders.
Run Tecno Flash Tool
- Open the tool folder and double-click SWD_AfterSales.exe or Tecno Flash Tool.exe.
- Wait for the tool to load.
Load Firmware
- In the Flash Tool interface, go to “Operation Area” and select the second tab, usually labeled “Setting”.
- Click Browse to locate the Android_scatter.txt file inside the extracted KB8 firmware folder.
Start Flashing
- Hit the Play (Start/Download) button to initiate the flashing process.
Connect Your Device
- Power off your Tecno Spark 3 Pro.
- Hold Volume Down or Volume Up and connect the device to the PC using a USB cable.
- The tool will detect the phone and start flashing.
✅ Done
- Once the flashing is complete, you’ll see a green Success/OK message.
- Disconnect the device and boot it up.

🛠 Troubleshooting Tips

🚫 Phone Not Detected?

Use a different USB cable or port.
Reinstall MTK Drivers.
Try holding Volume Up instead of Volume Down.

🔁 Bootloop After Flashing?

Boot into recovery (Vol Up + Power) and perform a factory reset.
Try selecting “Firmware Upgrade” mode if available.

🔒 FRP Lock Remains?

Ensure you’re flashing the correct and latest firmware version.
Consider using Format All + Download carefully (advanced users).