✅ Flash Tecno Pouvoir 3 Air LC6a | FRP Unlock | Fix Bootloop | Dead Fix
Flashing your Tecno LC6a (Pouvoir 3 Air) can help you:
- 🔓 Remove FRP Lock (Google Account)
- 🔄 Fix bootloop or stuck-on-logo issues
- 🛠️ Recover from soft brick or failed updates
- 🔧 Restore stock firmware and resolve bugs or lags
📁 Download Tecno LC6a Flash Files:
Grab the right firmware version for your model:
🔧 Required Tools & Drivers:
💡 Note: If you face errors with the MultiPort Tool, switch to the Tecno Flash Tool instead.
📲 How to Flash Tecno Pouvoir 3 Air LC6a
⚠️ Important: Flashing will wipe your phone data. Backup before proceeding if possible.
✅ Method 1: Using SP Flash Tool
- Install MTK Drivers
- Download and install from the link above.
- Restart your PC.
- Extract and Launch SP Flash Tool
- Extract the downloaded SP Flash Tool.
- Run
flash_tool.exeas administrator.
- Load Scatter File
- Click Scatter-Loading on the tool.
- Navigate to the extracted firmware folder.
- Select the
Android_scatter.txtfile.
- Begin Flashing
- Click the Download button.
- Power off the device completely.
- Press Volume Down or Up and connect the phone via USB.
- ✅ Wait for flashing to complete — you’ll see a green checkmark.
✅ Method 2: Using MultiPort Download Tool
- Open Multiport_download_exe_v5.1420.
- Load the firmware using the Scatter File.
- Set DA and Auth files if available (optional).
- Click Start All.
- Connect the switched-off phone.
- Flashing will begin automatically.
🛠️ Troubleshooting Tips
🔌 Phone Not Detected?
- Reinstall or update MTK Drivers
- Try using a different USB cable or USB 2.0 port
- Make sure your device is powered off while connecting
🔄 Bootloop After Flash?
- Reboot into Recovery Mode (Power + Vol Up)
- Perform a Factory Reset from recovery
💡 Want to Root or Install Custom Recovery?
Let me know! I can provide:
- TWRP recovery for Tecno LC6a (if available)
- Magisk boot patching method
- Rooting instructions without PC
📎 Helpful Links from AndroidHub.co.in
