detailed firmware flashing guide for the Vivo V29e 5G (PD2325F). This version provides clarity for beginners and professionals, ensuring smooth flashing using the SP Flash Tool for MediaTek-based devices.
✅ Vivo V29e 5G (PD2325F) Flash File Download & Flashing Guide
Facing issues like boot loop, stuck on logo, lag, or software-related problems? Flashing the stock firmware is the best way to restore your Vivo V29e 5G to factory condition.
📁 Download Vivo V29e 5G Flash Files
Here are the available stock ROMs for different Android versions and build stages:
| Firmware Version | Android | Release Info |
|---|---|---|
| 📥 PD2325F_EX_A_14.1.17.1.W30.V000L1 | Android 14 | Latest W30 Release |
| 📥 PD2325F_EX_A_14.1.17.1.W20.V000L1 | Android 14 | Stable W20 Release |
| 📥 PD2325F_EX_A_13.0.11.6.W30.V000L1 | Android 13 | |
| 📥 PD2325F_EX_A_13.0.10.0.W20.V000L1 | Android 13 | |
| 📥 PD2325F_EX_A_13.0.9.0.W30.V000L1 | Android 13 | Initial Build |
📌 Note: Always use firmware that matches your device’s region and Android version for best results.
🧰 Required Tools & Drivers
| Tool/Driver | Use |
|---|---|
| ⚙️ SP Flash Tool | Used to flash firmware on MTK devices |
| 📦 MTK USB Driver | Enables PC to detect MediaTek phones |
| 🔓 MTK Auth Bypass Tool / Af Tool | Required for devices with secure boot protection |
🔗 Download Tools
🛠️ How to Flash Vivo V29e 5G PD2325F via SP Flash Tool
🔹 Step 1: Install MediaTek USB Drivers
- Install the MTK driver package on your PC.
- Reboot the system after installation to ensure detection.
🔹 Step 2: Extract the Files
- Unzip the firmware package (you’ll see files like
Android_scatter.txt, boot.img, system.img, etc.). - Extract the SP Flash Tool in a separate folder.
🔹 Step 3: Launch SP Flash Tool
- Open the SP Flash Tool folder.
- Right-click on
flash_tool.exeand select Run as Administrator.
🔹 Step 4: Load Scatter File
- In SP Flash Tool, click on “Scatter-loading”.
- Navigate to the firmware folder and select
Android_scatter.txt.
🔹 Step 5: Connect the Device
- Turn off the device completely.
- Hold Volume Up or Down, then connect the USB cable to your PC.
- If not detected, try connecting without pressing any buttons.
💡 Secure Boot Note:
If your phone is protected, use the MTK Auth Bypass Tool before initiating the flash.
🔹 Step 6: Start the Flashing Process
- In SP Flash Tool, click Download.
- Flashing will begin. Wait until the green “Download OK” checkmark appears.
🔹 Step 7: Reboot the Device
- Disconnect the phone.
- Power it on — the first boot may take 5–10 minutes.
🧩 Troubleshooting & Tips
| Problem | Solution |
|---|---|
| Device not detected | Reinstall MTK drivers or try a different USB port |
| SP Flash Tool stuck | Use another firmware version or tool version |
| Bootloop after flash | Do a factory reset from recovery |
| SP Flash Tool errors (4032, 2005, etc.) | Double-check scatter file and try Format All + Download (⚠️ use with caution) |
🛠️ Need Extra Help?
Let me know if you want:
- 🔗 Direct links to specific firmware versions
- 📸 Test point image (for deep flashing)
- 📹 Step-by-step flashing video
- 📄 PDF version of this guide
I can also walk you through the MTK Auth Bypass if your phone is locked. Just say the word!
